Festool PN571810 用户手册

Safety rules

Read and understand all in-

structions. Failure to follow all instructions

listed below may result in electric shock, fi re

and/or serious personal injury.

SAVE THESE INSTRUCTIONS

General safety rules

1) Work area safety

a) Keep work area clean and well lit. Clut-

tered and dark areas invite accidents.
b) Do not operate power tools in explo-

sive atmospheres, such as in the pres-

ence of fl ammable liquids, gases or dust.

Power tools create sparks which may ignite

the dust or fumes.

c) Keep children and bystanders away

while operating a power tool. Distractions

can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the out-

let. Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodifi ed plugs

and matching outlets will reduce risk of elec-

tric shock.
b) Avoid body contact with earthed or

grounded surfaces such as pipes, radia-

tors, ranges and refrigerators. There is an

increased risk of electric shock if your body is

earthed or grounded.
c) Do not expose power tools to rain or

wet conditions. Water entering a power tool

will increase the risk of electric shock.
d) Do not abuse the cord. Never use the

cord for carrying, pulling or unplugging

the power tool. Keep cord away from

heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk

of electric shock.
e) When operating a power tool outdoors,

use an extension cord suitable for out-

door use. Use of a cord suitable for outdoor

use reduces the risk of electric shock.
f) Hold power tool by insulated gripping

surfaces only, when performing an op-

eration where the cutting accessory may

contact hidden wiring or its own cord.

Contact with a „live“ wire will make exposed

metal parts of the power tool „live“ and shock

the operator.

3) Personal safety

a) Stay alert, watch what you are doing

and use common sense when operating a

power tool. Do not use a power tool while

you are tired or under the infl uence of

drugs, alcohol or medication. A moment of

inattention while operating power tools may

result in serious personal injury.
b) Use safety equipment. Always wear

eye protection. Safety equipment such as

dust mask, non-skid safety shoes, hard hat,

or hearing protection used for appropriate

conditions will reduce personal injuries.
c) Avoid accidental starting. Ensure the

switch is in the off position before plug-

ging in. Carrying power tools with your fi nger

Contents

Safety rules ....................................... 3

General safety rules ............................ 3
Specifi c Safety Rules ........................... 4

Technical data ................................... 5
Symbols ............................................ 5
Intended use ..................................... 5
Electrical connection and operation .. 5

Extension cord ................................... 6

Electronic control .............................. 6
Tool settings ..................................... 7

Dust extraction .................................. 7
Edge protector ................................... 7
Sanding motion .................................. 7
Choice and installation of sanding pads . 8
Attaching the abrasive ........................ 8
Securing polishing attachments ............ 9
Auxiliary handle ................................. 9

Working with the tool ....................... 9

Metalworking ..................................... 9

Maintenance and care ..................... 10

Pad brake ........................................ 10

Accessories, tools ........................... 10
Warranty ......................................... 11
Table A: Sanding ............................. 12
Table B: Polishing ........................... 12