Festool PN567696 用户手册
5
Technical data
RS 2
Wattage W 330
No load speed
No load speed
rpm
10 000
No. of strokes
spm
20 000
Sanding stroke
mm (in.)
2.4 (0.1)
Sanding base
mm (in.) 115 x 225 (4.53 x 8.86)
Weight kg
(lbs)
2 . 5 ( 5 . 5 )
Safety
/ II
RS 2 E
Wattage W 330
No load speed
No load speed
rpm
4 000 - 10 000
No. of strokes
spm
8 000 - 20 000
Sanding stroke
mm (in.)
2.4 (0.1)
Sanding base
mm (in.) 115 x 225 (4.53 x 8.86)
Weight kg
(lbs)
2.5
(5.5)
Safety
/ II
Symbols
Warning of general danger
Read the Operating Instructions/
Notes!
Notes!
Wear protective goggles
Wear a dust mask
V Volts
A Amperes
Hz Hertz
W Watt
~
A Amperes
Hz Hertz
W Watt
~
Alternating current
n
0
No load speed
Class II Construction
rpm
Revolutions per minute
spm
Strokes per minute
Intended use
The sanders are designed for sanding wood,
plastic, metal, stone, composite materials, paint /
varnish, fi lling material and similar materials.
plastic, metal, stone, composite materials, paint /
varnish, fi lling material and similar materials.
Materials with an asbestos content must not be
processed with these tools.
processed with these tools.
The machines must not be damp nor operated in
a damp environment for electrical safety reasons.
The machines may only be used for dry sanding.
a damp environment for electrical safety reasons.
The machines may only be used for dry sanding.
The user bears sole responsibil-
ity for any damage or accidents resulting from
incorrect use.
incorrect use.
Electrical connection and opera-
tion
The mains voltage must be the same as that
specifi ed on the ratings plate!
specifi ed on the ratings plate!
The switch (1.1) is used to switch the tool on and
off. The switch can be locked with the button (1.2)
on the side for continuous operation. The switch
can be released by pressing again.
off. The switch can be locked with the button (1.2)
on the side for continuous operation. The switch
can be released by pressing again.
1.2
1.1