Festool PN571579 用户手册
13
Sanding close to edges
The detachable brush segment allows you to re-
duce the distance between the wall/ceiling and
the side of the sanding pad.
duce the distance between the wall/ceiling and
the side of the sanding pad.
Press and hold the knob [7-1].
f
Remove the brush segment [7-2].
f
There is a retainer in the lid of the SYSTAINER
L
for storing the brush segment.
Hook in the brush segment at the opposite end
Hook in the brush segment at the opposite end
f
to the knob [7-1], swivel towards the sanding
head and engage into position.
head and engage into position.
Dust extraction
CAUTION
Breathing in dust can damage the respiratory
passage!
passage!
Always connect the machine to a dust extrac-
f
tor.
When performing work that generates dust,
When performing work that generates dust,
f
always wear a dust mask.
A Festool dust extractor with an extractor hose
diameter of 27 mm or 36 mm (recommended due
to the improved suction power) can be connected
to the extractor connector [8-2].
diameter of 27 mm or 36 mm (recommended due
to the improved suction power) can be connected
to the extractor connector [8-2].
The special extraction hose and special suction
L
sleeve [8-1] (available as an accessory) ensure
permanent attachment and protect against
kinking.
Use the dust extractor CT 36 E AC-LHS on large
permanent attachment and protect against
kinking.
Use the dust extractor CT 36 E AC-LHS on large
L
surfaces because this extractor guarantees the
permanent suction power required.
Press the green button [8-4] to open the me-
permanent suction power required.
Press the green button [8-4] to open the me-
f
chanical lock [8-3].
Attach the extraction hose on the dust extractor
Attach the extraction hose on the dust extractor
f
to the outlet spigot [8-2].
Swivel the mechanical lock [8-3] upwards until
Swivel the mechanical lock [8-3] upwards until
f
it engages.
Operation
WARNING
Risk of injury
Do not hold the machine by the head.
f
Hold the machine with both hands.
f
Make sure that all clamping levers are closed
f
before operating the machine.
7
7-1
7-2
1
2
8
8-1
8-2
8-4
8-3
1
2