Husqvarna K960 用户手册

12 – 

English

Diamond blades consist of a steel body provided with 
segments that contain industrial diamonds.

Diamond blades ensure lower costs per cutting operation, 
fewer blade changes and a constant cutting depth.

When using diamond blades make sure that it rotates in the 
direction indicated by the arrow on the blade.

Always use a sharp diamond blade. Sharpen the blade by 
cutting in a soft material such as sandstone or brick.

Diamond blades are available in several hardness classes. A 
"soft" diamond blade has a relatively short service life and 
large cutting capacity. It is used for hard materials such as 
granite and hard concrete. A "hard" diamond blade has a 
longer service life and reduced cutting capacity, and should 
be used for soft materials such as brick and asphalt.

Diamond blades are ideal for masonry, reinforced concrete 
and other composite materials. Diamond blades are not 
recommended for cutting metal.

Diamond blades for wet cutting should have water poured 
over them during the cutting to cool the blade and bond the 
dust.

Diamond blades for dry cutting are a new generation of blades 
that do not require water cooling. However, the blades will still 
be damaged by excessive heat. It is most economical to allow 
the blade to cool by simply lifting it out from the cut every 30–
60 seconds and letting it rotate in the air for 10 seconds.