Husqvarna K 3600 MKII 用户手册

English

 – 11

On account of the machine’s unique design the driving power 
is not transferred at the centre of the blade. The flanges on the 
two guide rollers run in the blade’s grooves. Springs on the 
guide rollers press out the rollers, which in turn press the V-
shaped edge on the inside diameter of the blade against the 
V-shaped groove in the drive wheel. The drive wheel is fitted 
on an axle which is driven by the hydraulic motor.

This allows a total cutting depth of 260 mm (10 inches) with a 
350 mm (14 inches) diamond blade.

1

Blade

2

Support rollers

3

Drive wheel

4

Guide rollers

5

V-shaped edge

As the blade is used the inside diameter and the groove in the 
drive wheel become worn.

The ring cutter will also work well in the future if:

•

the drive wheel is not too worn

A) New

B) Worn

•

the guide rollers are not too worn

A) New

B) Worn

•

adjustment between the rollers and blade is correct.

The roller setting should be checked twice during the life of 
the diamond blade, once after fitting the blade and when the 
blade is semi worn.

We offers a number of blades for different materials in its 
range. Check with your Husqvarna dealer to see which blades 
are best suited for your usage.

•

Wipe off any dirt from the surface of the blade.

•

Loosen the locking nuts on the support roller cover.

•

Unscrew the adjuster screws a few turns.