Husqvarna K 3600 MKII 用户手册

English

 – 15

•

Remove the support roller cover.

•

Lift off the blade.

•

Unscrew the knob. First turn the knob a few turns until you 
feel a resistance. The guide roller then follows the knob 
out and stops when it feels a resistance.

The guide roller is pressed into the knob. In order to loosen 
the guide roller, you need to continue turning the knob until it 
loosens completely.

•

The guide roller can now be pulled out of the chassis

•

Screw the knob until it bottoms, and then loosen the knob 
2 turns.

•

Insert the guide roller in the chassis

•

Now press the guide roller into the knob.

Lubricate the guide roller’s sleeve using grease. Fit the 
grease gun on the grease nipples (A) and pump in grease 
until clean grease emerges from the overflow hole (B).

•

Fit the blade. See the heading Fitting the blade.

•

The support rollers do not drive the blade.

•

Incorrect adjustment can result in damage to the blade.

•

If the blade rotates slowly or stops, stop cutting 
immediately and trouble shoot.

A

B