Husqvarna FS 413 用户手册

下载
页码 104
9
 
SAFETY INSTRUCTIONS
 WARNING!
 
 
Before operating machine, read and under-
stand this entire operation manual & engine 
operation manual supplied with engine. 
Be familiar with machine before operation!
The working area must be completely 
clear, well lit and all safety hazards 
removed.
Any persons not involved in the work, 
should leave the area.
WARNING! Take care when handling 
fuel.  Bear in mind the risk of fire, explo-
sion and inhaling fumes.
General use
Never fuel machine in vicinity of sparks or 
flames. Do not use machine in flammable 
area.
Do not smoke while fueling or using the 
machine.
Fuel Safety:
• Only store fuel in containers approved for the purpose.
• Only refuel machine with engine OFF. Never remove fuel 
cap and fill the fuel tank while the engine is running.
• Always refuel in a well ventilated area.
• Never fill a fuel tank indoors.
• Allow engine to cool before refueling.
• Move machine 0 feet ( meters) from refueling point 
before starting engine.
• Never start the machine:
 
) If fuel has been spilled on the machine.  Wipe  
 
off spillage and allow remaining fuel to evaporate.
 
) If you have spilled fuel on yourself or your  
 
clothes.  Use soap and water to wash any part of  
 
your body that has come in contact with fuel.
 
) If the machine is leaking fuel.  Check regularly  
 
for leaks from the fuel cap and fuel lines.
• Store and transport machine and fuel so that there is 
no risk of any leakage or fumes coming into contact with 
sparks or flames, for example, electrical machinery or 
electric motors, electrical relays / switches, or boilers.
DUST WARNING 
Cutting, especially when DRY cutting, generates dust that comes from the material being cut, which 
frequently contains silica.  Silica is a basic component of sand, quartz, brick clay, granite and numerous other 
minerals and rocks.  Exposure to excessive amount of such dust can cause:
Respiratory diseases (affecting your ability to breath), including chronic bronchitis, silicosis and pulmo-
nary fibrosis from exposure to silica.  These diseases may be fatal;
Skin irritation and rash; and
Cancer according to NTP* and IARC*
 
* National Toxicology Program, International Agency for Research on Cancer
Take precautionary steps
Avoid inhalation of and skin contact with dust, mist and fumes;  
Wet cut when feasible, to minimize dust;
Wear and ensure that all bystanders wear appropriate respiratory protection such as dust masks de-
signed to filter out microscopic particles.  (See OSHA 29 CFR Part 1910.1200)
California Prop 65 Warning:  
Use of this product can cause exposure to materials known to the State of California to cause cancer and/or birth 
defects or other reproductive harm.
WARNING! Do not contact the tool when 
machine is in operation.
Operator must wear 
personal protective 
equipment & cloth-
ing appropriate to the 
work he is doing.
Personal protective 
equipment, such as 
hearing & eye protec-
tion, is mandatory.