Husqvarna 966906738 用户手册

 

English

 

 –

 

 

 

7

 

1153136-26

 

 Rev

 

.1 

 

2009-12-29

 

W

 

ARNING! Chain saws can be 

dangerous! Careless or incorrect use can 
result in serious or fatal injury to the 
operator or others.

Please read the operator’s manual 
carefully and make sure you 
understand the instructions before 
using the machine.

Always wear:
•

Approved protective helmet

•

Approved hearing protection

•

Protective goggles or a visor

 

This product is in accordance with 
applicable EC directives.

Noise emission to the environment 
according to the European 
Community’s Directive. The machine’s 
emission is specified in chapter 
Technical data and on label.

 

Chain brake, activated (right) 

 

Chain brake, not activated (left)

 

 The valve 

is to reduce the pressure in the cylinder 
and make starting easier. You should 
always use the decompression valve 
when starting the machine.

 

 Set the choke control 

in the choke position. This should 
automatically set the stop switch to the 
start position.

 

 

Air purge

 

Adjustment of the oil pump

 

 

 

Switch off the engine bef

 

ore carrying 

out any checks or maintenance. 
CAUTION! The start/stop switch 
automatically returns to run position. 
In order to prevent unintentional 
starting, the spark plug cap must be 
removed from the spark plug when 
assembling, checking and/or 

 

performing maintenance. 

 

Always wear approved protective gloves.

 

Regular cleaning is required.

 

Visual check.

 

Protective goggles or a visor must be 
worn.

 

Refuelling.

 

Filling with oil and adjusting oil flow.

 

The chain brake must be engaged when 
the chain saw is started.

WARNING! Kickback may occur when 
the nose or tip of the guide bar touches 
an object, and cause a lightning fast 
reverse reaction, kicking the guide bar 
up and towards the operator. May cause 
serious personal injury.