Husqvarna MC 18 13H 用户手册

下载
页码 32
9
SAFETY FIRST!
WARNINGS
DO’s and DO NOT’s
WARNING:
 FAILURE TO COMPLY WITH THESE WARNINGS AND OPERATING 
INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY.
    DO NOT
 
DO NOT    operate this machine unless you have read and understood this operator’s manual.
DO NOT    operate this machine without the blade guard, or other protective guards in place.
DO NOT    stand behind or in front of the blade path while the engine/motor is running.
DO NOT    leave this machine unattended while the engine/motor is running.
DO NOT    work on this machine while the engine/motor is running.
DO NOT    operate this machine when you are tired or fatigued.
DO NOT    use a wet blade without adequate water supply to the blade.
DO NOT     exceed maximum blade speed shown for each blade size.  Excessive speed could result in blade breakage.
DO NOT    operate the machine if you are uncertain of how to run the machine.
DO NOT    use damaged equipment or blades.
DO NOT    touch or try to stop a moving blade with your hand.
DO NOT    cock, jam, wedge or twist the blade in a cut.
DO NOT    transport a cutting machine with the blade mounted on the machine.
DO NOT    use a blade that has been dropped or damaged.
DO NOT     
use carbide tipped blades.
DO NOT    touch a dry cutting diamond blade immediately after use. These blades require several minutes to cool after each cut.
DO NOT    use damaged or worn blade fl anges.
DO NOT    allow other persons to be near the machine when starting, refueling, or when the machine is in operation.
DO NOT    operate this machine in an enclosed area unless it is properly vented.
DO NOT    operate this machine in the vicinity of anything that is fl ammable. Sparks could cause a fi re or an explosion.
DO NOT    allow blade exposure from the guard to be more than 180 degrees. 
DO NOT    operate this machine with the belt guard or blade guard removed.
DO NOT    operate this machine unless you are specifi cally trained to do so.
DO NOT    use a blade that has been over heated. (Core has a bluish color.)
DO NOT    jam material into the blade.
DO NOT    grind on the side of the blade.
DO NOT    lay power cords in or near the water.
DO NOT    tow this machine behind a vehicle.
DO NOT    replace the motor with any motor that does not have a special grounding connection. 
DO NOT    operate this machine while under the infl uence of drugs or alcohol.
*****************
This saw was designed for certain applications only.  DO NOT modify this saw or use for any application other than for which 
it was designed. If you have any questions relative to its application, DO NOT use the saw until you have written Diamant 
Boart, Inc. and we have advised you.
Husqvarna Constructuion Products N. A.
17400 West 119th Street
Olathe, Kansas  66061
USA