Sony PEG-T415/G 用户手册
![Sony](https://files.manualsbrain.com/attachments/7e61ba04cadfce70cb41a1a70ef1d62a30f0a5fe/common/fit/150/50/682a2570dc00831b079177f57c62a2915dd3423eb752334060fbcf750d89/brand_logo.png)
204
Chapter6
Additional information
I tried to perform a local HotSync operation, but it did not
complete successfully.
complete successfully.
Try each of these in turn:
, Make sure that HotSync Manager is running. If HotSync Manager is
running, exit, and restart it.
, Make sure that Local USB is selected in the HotSync Manager menu
or the Palm Desktop for CLIÉ software menu.
, Check that the cradle is properly connected to the USB connector of
your computer.
, Read the HotSync Log for the user account for which you are
performing a HotSync operation.
, Make sure that your CLIÉ handheld is seated in the cradle correctly.
, Make sure that the gold-plated connectors on the cradle and your
CLIÉ handheld are clean. Use a pencil eraser to clean the connectors.
I cannot perform an IR HotSync operation.
, Make sure that the HotSync Manager is running and the Serial Port
for local operations is set to the simulated port for infrared
communication.
communication.
, On your CLIÉ handheld, make sure that the HotSync application is
set to IR to a PC/Handheld.
, Make sure that the IR port of your CLIÉ handheld is aligned directly
opposite to, and within a few inches of, the infrared device of your
computer.
computer.
, IR HotSync operations do not work after you receive a low battery
warning. Check the battery power of your CLIÉ handheld. Recharge
the battery if necessary.
the battery if necessary.
, If you have problems using a specific speed, select Prefs, Connection,
IR to a PC/Handheld, Edit, then Details. Then select a lower speed in
the Details dialog box.
the Details dialog box.
Troubleshooting – Frequently Asked Questions
Continued on next page