Woodstock W1829 用户手册
-27-
Model W1829 (Mfg. Since 9/11)
M
A
INTE
N
N
A
N
CE
MAINTENANCE
Lubrication
Since all bearings are sealed and
permanently lubricated, simply leave them
alone until they need to be replaced. Do
not lubricate them.
Frequently blow-off sawdust and chips with compressed
air. This is especially important for the internal working
parts and motor. Dust build-up around the motor is a sure
way to decrease its life span.
Cleaning
Regular periodic maintenance on your machine will
ensure its optimum performance. Make a habit of
inspecting your machine each time you use it.
Check for the following conditions and repair or
replace when necessary:
• Loose mounting bolts.
• Worn switch.
• Worn or damaged cords and plugs.
• Damaged V-belt.
• Any other condition that could hamper the safe
operation of this machine.
General
MAKE SURE that your machine is
unplugged during all maintenance pro-
cedures! If this warning is ignored, seri-
ous personal injury may occur.
Tables can be kept rust-free with regular applications
of products like SLIPIT
®
. For long term storage you may
want to consider products like Boeshield T-9™.
Table & Base
To ensure optimum power transmission from the motor
to the blade, the V-belt must be in good condition (free
from cracks, fraying and wear) and properly aligned and
tensioned (refer to
V-Belt Replacement on Page 36).
V-Belts