Woodstock W1724 用户手册

7

We do not recommend using an extension cord
for 220V equipment. Instead, arrange the
placement of your machinery and installed
wiring to eliminate the need for extension
cords. If you must use an extension cord, make
sure it is rated Standard Service (grade S) and
capable of handling an 18 amp load. The
extension cord must always contain a ground
wire and plug pin. Be sure to ask an expert
about the correct gauge to use with your
desired cord length. Always repair or replace
extension cords when they become worn or
damaged.

This machine must be grounded! The electrical
cord supplied with your planer does not come
with a 220 volt plug. Install a NEMA 6-20 plug
and outlet (See Figure 1) with a ground pin. If
your outlet does not accommodate a ground
pin, have a ground circuit installed by a
qualified electrician or have an appropriate
adapter installed and grounded properly. An
adapter with a grounding wire does not
guarantee the machine will be grounded. A
ground source must be verified.

The motor supplied with your new planer is
rated at 3 HP and will draw approximately 18
amps during 220 volt operation. When
choosing an outlet for this machine, we
recommend using a NEMA 6-20 plug and
receptacle with a 20 amp circuit breaker or
fuse. Keep in mind that a circuit being used by
other machines or tools at the same time will
add to the total load being applied to the
circuit. Add up the load ratings of all machines
on the circuit. If this number exceeds the
rating of the circuit breaker, fuse or wires,
use a different circuit.

6-30R

6-30P

Figure 1. NEMA 6-20 plug and outlet.

NEVER replace the circuit breaker with one
rated at a higher amperage or damage to the
circuit may occur.