Grizzly 60773 用户手册
-6-
Model G0773 (Mfd. Since 12/14)
Milling Headstock
W. ON/OFF Switch w/Emergency Stop Button:
When pressed, cuts power to motor and con-
trol panel. To reset, press front tab, lift switch
cover, and press green ON button. Cover
must be unlatched for machine to run.
trol panel. To reset, press front tab, lift switch
cover, and press green ON button. Cover
must be unlatched for machine to run.
X. Mill Fault Light: Illuminates if mill motor is
overloaded.
Y. Fine Vertical Handwheel: Provides preci-
sion control of vertical headstock travel dur-
ing setups.
ing setups.
Z. Coarse Vertical Handwheel: Raises and
lowers headstock for Z-axis spindle position-
ing during setups.
ing during setups.
AA. Vertical Travel Lock Lever: Locks head-
stock position along column.
AB. Mill Depth Stop: Limits downward move-
ment of mill headstock.
AC. Drill Chuck: Holds drill bit during milling
operations.
AD.
Variable-Speed Spindle Control Dial:
Provides variable control of spindle speed
between 100–2500 RPM.
Provides variable control of spindle speed
between 100–2500 RPM.
AE. Mill Power Indicator Light: Illuminates when
Lathe/Mill Selector Switch (see
Page 4) is set
to milling mode.
Figure 5. Milling headstock controls.
AD
AE
AB
Y
Z
W
X
AA
AC