Southbend 1368 用户手册

-5-

SB1363-64/SB1367-68

Mfg. Since 10/09

This item was carefully packaged to 
prevent damage during transport. 
If you discover any damage, please 
immediately call Customer Service 
at (360) 734-1540 for advice. You 
may need to file a freight claim, so 
save the containers and all packing 
materials for possible inspection by 
the carrier or its agent.

The purpose of the preparation 
section is to help you prepare your 
rotary table for operation. The list 
below outlines the basic process. 
Specific steps for each of these 
points will be covered in detail later 
in this section.

The typical preparation process is as 
follows:
1.  Unpack the tool and inventory 

the contents.

2.  Clean the tool and its 

components.

3.  Install the rotary table on 

the mill table horizontally or 
vertically.

4.  Align the rotary table with the 

mill spindle centerline.

The items listed below are required 
to successfully set up and prepare 
this tool for operation.

•  Safety glasses
•  Cleaner/degreaser (see Page 6)
•  Clamping hardware and tools
•  Custom keys for horizontal

installation (see Page 7) 
(Optional)

•  Machinist's square
•  Test indicator
•  Edge finder (Optional)

A.  Rotary Table  . . . . . . . . . . . . . . 1
B.  Handwheel Handle . . . . . . . . . 1