Stanton M.201 用户手册
MIXER CONTENTS
1. Input fader - Controls individual source levels (channels) in the mix.
2. Input toggle switch - Selects which source will be active based on what you have connected to the
2. Input toggle switch - Selects which source will be active based on what you have connected to the
rear panel input section (phono/line).
3. Channel EQ - Adjusts the high, mid and low frequency levels of the input channels for good sound.
4. Channel Gain – Adjusts the pre-fader volume for cleaner sound.
5. Replaceable Crossfader - Achieves clean segues between the two input channels. "Hard left"
4. Channel Gain – Adjusts the pre-fader volume for cleaner sound.
5. Replaceable Crossfader - Achieves clean segues between the two input channels. "Hard left"
selects Channel 1. "Hard right" selects Channel 2. With the crossfader centered, both channels are
live. Use the crossfader for fast and seamless segues (fades) from one channel to the other.
Note: The crossfader is user replaceable in case of failure. Simply unscrew the two large screws
which hold it in place, lift it out and disconnect its cable. Re-attach the new crossfader and screw
the mounting plate back onto the unit - you’re back in business!
live. Use the crossfader for fast and seamless segues (fades) from one channel to the other.
Note: The crossfader is user replaceable in case of failure. Simply unscrew the two large screws
which hold it in place, lift it out and disconnect its cable. Re-attach the new crossfader and screw
the mounting plate back onto the unit - you’re back in business!
6. Mic Input Gain – Adjusts microphone input level.
7. Mic Input – Insert your Microphone with ¼” plug here.
8. Headphone Input – Insert in the ¼” plug for your headphones here.
9. Channel Cue / Cue Pan - Used to preview channel audio to your headphones. Listen here before
7. Mic Input – Insert your Microphone with ¼” plug here.
8. Headphone Input – Insert in the ¼” plug for your headphones here.
9. Channel Cue / Cue Pan - Used to preview channel audio to your headphones. Listen here before
bringing up channel faders or moving the crossfader.
10. Headphone Level – Adjusts cue volume.
11. Master Level - Controls the overall output level.
12. Level Indicators – The dual LEDs indicators are used to indicate the master output level of channels
11. Master Level - Controls the overall output level.
12. Level Indicators – The dual LEDs indicators are used to indicate the master output level of channels
Right and Left.
13. Mic EQ – The mic channel include a two-band EQ with a range of +10dB to –10dB.
1
2
13
3
4
5
6
7
8
11
10
12
9