Husqvarna PG530 用户手册

English -

 13

The menu tree illustrated on this page outlines the 
important menu options that provide useful information 
for monitoring and diagnostic purposes when using the 
machine.

As can be seen on the menu tree to the right, when 
the machine is turned on, the variable speed drives 
or frequency converters are set to display the Output 
Frequency to the motor (a zero value will register when 
the machine is in stand-by mode).

It can also be seen that the Output Frequency page 
falls under the Monitor Menu.

The left hand column, highlights that the two primary 
menus important to the operator are the Monitor Menu 
and Fault History menu. 

Navigation through the menu tree is achieved by using 
the up, down, left and right keys on the keypad (see 
previous page).

OUTPUT FREQUENCY

Frequency motor is running at when machine is running.

REF. FREQUENCY

Frequency speed control dial is set to.

MOTOR SPEED

Speed of motor when machine is running.

MOTOR CURRENT

Current draw of motor when machine is running.

MOTOR TORQUE

Percentage of motor torque when machine is running.

MOTOR POWER

Percentage of motor power when machine is running.

MOTOR VOLTAGE

Percentage of motor voltage when machine is running.

DC LINK VOLTAGE

Indicates quality of power supply.

Parameter Menu

Motor Power

Motor Voltage

DC Link Voltage

Motor Torque

Monitor Menu

Expanded Boards 

Menu

System Menu

Faults History Menu

Active Faults Menu

Keypad 

Control Menu

Output Frequency

Motor Speed

Motor Current