Husqvarna PG530 用户手册
English -
25
Maintenance schedule
Item
Action
Frequency
Check that head lock
are tight.
are tight.
Tighten head locks and re-set in thread-locking com-
pound if required (Suggested thread-locking compound
Loctite 680)
pound if required (Suggested thread-locking compound
Loctite 680)
Daily
Inspect heads for slop/
broken “fi ngers” if using
spring steel heads.
broken “fi ngers” if using
spring steel heads.
Examine machine heads while machine tipped back.
Disconnect Planetary Drive motor (small motor) and run
discs at lowest speed. Check to see how concentric/true
grinding heads are running.
Disconnect Planetary Drive motor (small motor) and run
discs at lowest speed. Check to see how concentric/true
grinding heads are running.
Daily
Check effectiveness of
planetary seal.
planetary seal.
Remove planetary head motor/gearbox system and
check for presence of dust under machine cover.
check for presence of dust under machine cover.
Weekly
Check condition of
chain ring.
chain ring.
Remove planetary head motor/gearbox system and in-
spect chain links in chain ring. Ensure links are clean and
free from build-up.
spect chain links in chain ring. Ensure links are clean and
free from build-up.
Weekly with Planetary Seal
Check condition of
Drive Sprocket.
Drive Sprocket.
Remove planetary head motor/gearbox system and
inspect condition of planetary drive sprocket.
inspect condition of planetary drive sprocket.
Weekly with Planetary Seal
Inspect internal compo-
nents of machine.
nents of machine.
Remove belt tensioner cover plate and check inside
machine for dust, moisture or belt fragments. Ensure to
re-seal cover plate with silicone sealant.
machine for dust, moisture or belt fragments. Ensure to
re-seal cover plate with silicone sealant.
6 monthly
Clean contents of elec-
trical cabinet.
trical cabinet.
Blow out inside of electrical cabinet and variable speed
drives or frequency converters with DRY compressed air.
drives or frequency converters with DRY compressed air.
Every 2 months
IMPORTANT!
Prior to removing belt tensioner cover plate,
ensure cover plate and area surrounding cover
plate are totally clean. Avoid debris from enter-
ing into inside of machine.
ensure cover plate and area surrounding cover
plate are totally clean. Avoid debris from enter-
ing into inside of machine.
Maintenance schedule