Echo X7502026001 用户手册

.080 (2.0 mm) dia. – 20’ (6 m)

.095 (2.4 mm) dia. – 20’ (6 m)

1.   Cut one piece of line to recommended length.

2.   Align arrows on top of knob with openings in eyelets.

3.   Insert one end of trimmer line into an eyelet, and push line equal 

distance through trimmer head.  

4.   Hold trimmer head while turning knob clockwise to wind line onto 

spool until about 5” (13 cm) of each line remains exposed.   

For normal use, Speed Feed head disassembly is not necessary.  

However, if circumstances require disassembly, follow these 

instructions. 

1.  Press top of locking tabs (A) on both sides of Speed Feed head to 

release cover (B) from eyelet carrier(C). 

2.  Remove cover from eyelet carrier.  

When the wear indicators located at the bottom of the Speed-Feed 

head are worn smooth, replacement of the cover or the entire 

Speed-Feed head is required.