Echo X7502026001 用户手册

The ECHO product you purchased has been partially assembled for your convenience. Due to packaging restrictions, 

installation of the plastic debris shield, nylon line head, and positioning of the front handle are necessary.

After opening the carton, check for damage.  Immediately notify your retailer or ECHO Dealer of damaged or missing 

parts.  Use the contents list to check for missing parts.

 Some units may be factory pre-assembled. No assembly tools are needed and the nylon line head, plastic debris shield, 

and mounting hardware, shown in the contents list, are pre-assembled to the unit. Only the front handle may need to be 

re-positioned for comfortable operation. 

_______1  -  Power Head / Drive Shaft Assembly

  ______  -  1,  Operator's Manual

  ______  -  1,  Safety Manual

  ______  -  1,  Warranty Registration Card

_______  -  1,  Safety Glasses

 _____  -  1, Nylon Trimmer Head

 _____  -  Assembly Tool (s)

 _____    --1,  Plastic shield 

 _____    --1,  shield plate 

 _____    --3,  5mm x 16mm screws (shield mtg.)

Parts Required:  Plastic Shield, Shield Plate, three (3) 5mm x 16mm    

   

screws.

The plastic shield is for use with the Nylon Line Head only.  

Install Metal Shield when using plastic or metal blades.

1.  Remove plastic threaded shaft sleeve and adapter plate (C) from 

PTO shaft (A).

2.  Place the shield on the bottom of the bearing housing flange.

3.  Place shield plate (B) on shield, align holes. Install three (3) screws 

from bottom through plate and shield into gear case.

4.  Assemble adapter plate (C) onto PTO shaft.