Kompernass KH 2233 用户手册

English • 11

  The next available radio station will be found automati-

cally. As soon as a radio station is found with a sufficient 

broadcast signal, the station search will be stopped.

  If you would like to search further for a radio station: 

Press and hold the Skip/Tun forwards or Skip/Tun re-

verse button again for a few seconds. The station search 

will continue until the next radio station with a sufficient 

broadcast signal is found.

10.2. Manually searching for a radio station

The manual search can be used to find radio stations, for 

which only poor reception quality is available. To do this, 

press the Skip/Tun forwards or the Skip/Tun reverse button 

repeatedly. You can use this function to ...

  search the medium wave (AM) frequency range in steps 

of 9 kHz

  search the frequency modulation (FM) frequency range 

in steps of 0.05 MHz.

Repeat this until you have found the required radio station. 

If you would like to search for a stereo radio station in the 

FM (frequency modulation) frequency range: First press the 

FM Mode/ST/Mono button on the main unit. If a stereo ra-

dio station is found, then the stereo symbol will appear on 

the display screen.

10.3. Improving reception quality of 

frequency modulation (FM) radio stations

To improve reception quality of FM radio stations:

  Uncoil the trajectory antenna connector cable to its full 

length. Slowly move the end of the trajectory antenna 

connected to the main unit so that it points in different 

directions. Once you have found a good position for re-

ception of the radio station: Fix the trajectory antenna in 

this position (e.g. with tape).

  In the case of poor reception of a frequency modula-

tion (FM) radio station in stereo mode, it could also help 

to switch to mono reception. To do this, press the FM 

Mode/ST/Mono button once if stereo reception is cur-

rently on. The stereo indicator will disappear from the 

display screen.

10.4. Programming a radio station

You can preset up to ten radio stations in each frequency 

range. To do this:

  Use the automatic search function or the manual search 

function to search for the radio station that you would 

like to preset.

  Press the Memo/C-Adj button on the main unit. 01 will 

appear and Memory will blink on the display screen for 

the first of ten program positions.

  Press the Repeat/M-Up button on the remote control unit 

to select another program position. You can switch to the 

next program position by pressing the button again. 

  Once the program number, under which you would like 

to save the radio station, appears on the display screen: 

Press the Memo/C-Adj button again. The radio station is 

now preset for the selected program position. Memory 

appears on the display screen.

  To preset additional radio stations on other program po-

sitions: Repeat steps 1 to 4.

To move a preset radio station to another program position: 

  Select the desired radio station. 

  Press the Memo/C-Adj button. Memory blinks on the 

display screen.

  Press the Repeat/M-Up button to select another pro-

gram position.

  Once the program number, under which you would like 

to save the radio station, appears on the display screen: 

Press the Memo/C-Adj button again. The radio station is 

now preset for the selected program position. Memory 

appears on the display screen.

10.5. Selecting a preset radio station

  Press the Stop/Band button to select the frequency range 

of the preset radio station. The selected frequency range 

(AM medium wave or FM frequency modulation) will 

appear on the display screen.

  Press the Repeat/M-Up button to switch to the next 

stored radio station. The program position of the current-

ly selected radio station appears on the display screen.