Husqvarna 536 LIL 用户手册

English

 –

 17

•

Check the motor for dirt and cracks. Clean off grass 
and leaves from the engine using a brush.  Gloves 
should be worn when necessary.

•

Check that the trimmer head is completely attached to 
the trimmer. 

•

Check that the machine is in perfect working order. 
Check that all nuts and screws are tight.

•

Check that the trimmer head and trimmer guard are 
not damaged or cracked. Replace the trimmer head or 
trimmer guard if they have been exposed to impact or 
are cracked.

•

Never use the machine without a guard nor with a 
defective guard.

•

All covers must be correctly fitted and undamaged 
before you start the machine.

•

Only use the machine for the purpose it was intended 
for.

Make sure to use fully charged batteries. Use only a 
Husqvarna original battery in your machine. See technical 
data.

•

Insert the battery in the machine. The battery should 
slide easily into the battery holder on the machine. If 
the battery does not slide in easily, it is not being 
inserted correctly. The battery will lock itself into place 
when you hear a click. Make sure the battery is fitted 
correctly to the machine.

Turn on the machine. Press and hold the start button (>1 
sec.) until the green LED is lit.

Use the power trigger to control the speed.

Stop the machine by releasing the power trigger or the 
power trigger lockout and deactivate the machine.

Remove the battery from the machine by pressing the two 
release buttons and pulling out the battery.

Li-ion

Li-ion

IMPORTANT! Always remove the battery to prevent the 
machine being started by accident.