Husqvarna 80792 用户手册

4

NOTE: Operating with trimmer line of
uneven length will cause excessive
vibration. Always make sure the line is
wound evenly and trimmed to equal
lengths from the eyelets.

72036-15200
72005-92001
72017-92001
Shipped with
20 feet of .080 line.
Maximum fill–
40 feet of .080
30 feet of .095
26 feet of .105

INSTALLATION INSTRUCTIONS

72036-15200
Fits LT18, T18, T20, C20, LT20, T230,
C230, 22T
72005-92001
Fits F20, T25, C25, T27, C27, BP35,
T250, C250, T270, C270, T260, C260,
T350
72017-92001
Fits C35, C350, RC45, B45, B450

Remove the knob and spring (turn
counterclockwise to remove).

Remove the line spool.

Clean the spool, housing and eyelets.
Inspect for wear and damage.
Replace damaged components.

Reattach the eyelets if they were
removed. Never operate a trimmer
head head without eyelets!

Bend the line at the eyelet to form two
lengths. Wind both ends clockwise as
viewed from the underside of the
head.

Replace the line by threading it
through the eyelet in the spool until
the line ends are of about equal
length. Refer to the Line Chart
(above) for the proper amount of line.