Husqvarna 326L 用户手册

 

6 – 

 

English

  

′′′′

 

•

Make sure the throttle control is locked at the idle setting 
when the throttle lock is released.

•

Press the throttle lock and make sure it returns to its 
original position when you release it.

•

Check that the throttle control and throttle lock move freely 
and that the return springs work properly.

•

See instructions under the heading Start. Start the 
machine and apply full throttle. Release the throttle and 
check that the cutting attachment stops and remains at a 
standstill. If the cutting attachment rotates with the throttle 
in the idle position then the carburettor idle setting must be 
checked. See instructions under the heading 
Maintenance.

 

•

Start the engine and make sure the engine stops when 
you move the stop switch to the stop setting.

 

•

Ensure that the guard is undamaged and is not cracked.

•

Replace the guard if it has been exposed to impact or is 
cracked.

•

Always use the recommended guard for the cutting 
attachment you are using. See chapter on Technical data.

 

•

Regularly check the vibration damping units for cracks or 
deformation.

•

Check that the vibration damping element is undamaged 
and securely attached.

 

•

Never use a machine that has a faulty muffler.

•

Regularly check that the muffler is securely attached to 
the machine.

IMPORTANT! All servicing and repair work on the machine 
requires special training. This is especially true of the 
machine

 

′

 

s safety equipment. If your machine fails any of the 

checks described below you must contact your service 
agent. When you buy any of our products we guarantee the 
availability of professional repairs and service. If the retailer 
who sells your machine is not a servicing dealer, ask him for 
the address of your nearest service agent.