Husqvarna 965069703 用户手册

English

 – 13

•

Never start the machine indoors. Exhaust fumes can be 
dangerous if inhaled.

•

Observe your surroundings and make sure that there is no 
risk of people or animals coming into contact with the 
cutting equipment.

•

Place the machine on the ground, ensure the cutting 
attachment is clear of twigs and stones. Hold the body of 
the machine on the ground using your left hand 
(CAUTION! Not with your foot). Then grip the starter 
handle with your right hand and pull the starter cord. 

For safety reasons follow these recommendations!

•

Check that the support flange is not cracked due to fatigue 
or due to being tightened too much. Discard the support 
flange if it is cracked.

•

Ensure the locking nut has not lost its captive force. The 
nut lock should have a locking force of at least 1.5 Nm. 
The tightening torque of the locking nut should be 35-50 
Nm.

•

Check that the trimmer head and trimmer guard are not 
damaged or cracked. Replace the trimmer head or 
trimmer guard if they have been exposed to impact or are 
cracked.

•

Never use the machine without a guard nor with a 
defective guard.

Primer bulb: Press the air purge repeatedly until fuel begins 
to fill the bulb. The bulb need not be completely filled.

Choke: Set the choke control in the choke position.

Hold the body of the machine on the ground using your left 
hand (CAUTION! Not with your foot!). Grip the starter handle, 
slowly pull out the cord with your right hand until you feel 
some resistance (the starter pawls grip), now quickly and 
powerfully pull the cord. Never wrap the starter cord around 
your hand

Repeat pulling the cord until the engine starts. When the 
engine starts. return choke control to run position and apply 
full throttle; the throttle will automatically disengage from the 
start setting.