Husqvarna 245RX 用户手册

 

8 – 

 

English

 

This section describes how to choose and maintain your 
cutting equipment in order to:

•

Reduce the risk of kickback.

•

Obtain maximum cutting performance.

•

Extend the life of cutting equipment.

General rules

1

Only use cutting attachments with the guards we 
recommend! See the chapter on Technical data.

2

Keep the teeth of the blade correctly sharpened! Follow 
our instructions and use the recommended file gauge. An 
incorrectly sharpened or damaged blade increases the 
risk of accidents.

3

Maintain the correct blade setting! Follow our instructions 
and use the recommended blade setting tool. An 
incorrectly set blade increases the risk of jamming and 
kickback.

4

Check the cutting attachment for damage or cracks. A 
damaged cutting attachment should always be replaced.

 

Check that the harness straps are correctly positioned. Once 
the harness and machine have been adjusted, check that the 
harness quick release works correctly.

 

•

When fitting, tighten the nut in the opposite direction to the 
direction of rotation of the cutting attachment. To remove 
it, undo the nut in the same direction as the cutting 
attachment rotates. (CAUTION! The nut has a left-hand 
thread.)

•

Tighten the nut using the socket spanner. 35-50 Nm (3.5-
5 kpm).

 

 The nylon lining inside the locking nut must not 

be so worn that you can turn it by hand. The lining should 
offer a resistance of at least 1.5 Nm. The nut should be 
replaced after it has been put on approx. 10 times.