Husqvarna 323C 用户手册

18 – 

English

Ignition: Set the stop switch to the start position.

Choke: Set the throttle to the start position by moving the 
choke control to the choke position and then returning it to its 
original position.

Air purge: Press the air purge diaphragm repeatedly until 
fuel begins to fill the diaphragm. The diaphragm need not be 
completely filled.

Stop the engine by switching off the ignition.

Hold the body of the machine on the ground using your left 
hand (CAUTION! Not with your foot!). Grip the starter handle, 
slowly pull out the cord with your right hand until you feel 
some resistance (the starter pawls grip), now quickly and 
powerfully pull the cord. Never wrap the starter cord around 
your hand

Reset the choke control as soon as the engine fires and 
repeat until the engine starts. When the engine starts, quickly 
apply full throttle; the throttle will automatically disengage 
from the start setting.

CAUTION!  Do not pull the starter cord all the way out and do 
not let go of the starter handle when the cord is fully extended. 
This can damage the machine.