Husqvarna 235R 用户手册

English

 – 21

Ignition: Set the stop switch to the start position.

Choke: Set the throttle to the start position by moving the 
choke control to the choke position and then returning it to its 
original position. 

Primer bulb: Press the air purge repeatedly until fuel begins 
to fill the bulb. The bulb need not be completely filled. 

Hold the body of the machine on the ground using your left 
hand (CAUTION! Not with your foot!). Grip the starter handle, 
slowly pull out the cord with your right hand until you feel 
some resistance (the starter pawls grip), now quickly and 
powerfully pull the cord.

Repeat pulling the cord until the engine starts. When the 
engine starts. return choke control to run position and apply 
full throttle; the throttle will automatically disengage from the 
start setting.

CAUTION!  Do not pull the starter cord all the way out and do 
not let go of the starter handle when the cord is fully extended. 
This can damage the machine.

Stop the engine by switching off the ignition.