Roland JV-1010 用户手册

If you are running music software on your computer, you can use the 
computer to control the operation of the JV-1010. Of course, this allows you 
to play back and create song data, switch sounds automatically, and create 
sounds from the screen. This type of system is know as 

. The actual DTM functions available vary greatly with the 

application used. Therefore, it is very important to select software that 
matches your particular aims.

There are two methods that can be used to connect the JV-1010 to a 
computer, 

 and 

.

When connecting to the COMPUTER connector, a computer cable is used to 
connect the JV-1010 to your computer’s serial port (RS-232C).

When using MIDI connectors to make the connection, a MIDI interface 
(such as Roland’s Super MPU64) is required. In this case, the MIDI interface 
is connected to the computer, and a MIDI cable is used to connect the MIDI 
connectors of the MIDI interface to the JV-1010’s MIDI connectors.

Use the connection method that best suits your operating environment to 
connect the JV-1010 to your computer.

If connecting using the MIDI connectors, please read the related information 
starting on p. 41.

■

Switch off the power to the JV-1010, the computer, and any 
connected equipment.

To prevent malfunction 
and/or damage to speakers 
or other devices, always 
turn down the volume, and 
turn off the power on all 
devices before making any 
connections.