National Instruments SCC-LP02 用户手册

© National Instruments Corporation

Humidity ................................................ 10 to 90% RH, noncondensing

Maximum altitude .................................. 2,000 m

Pollution Degree (indoor use only) ........ 2

The SCC-LPXX

 

meets the requirements of the following standards 

for safety and electrical equipment for measurement, control, and 
laboratory use:

•

IEC 61010-1, EN 61010-1

•

UL 3111-1, UL 61010B-1

•

CAN/CSA C22.2 No. 1010.1

For UL and other safety certifications, refer to the product label, or visit 

ni.com/hardref.nsf

, search by model number or product line, and click the 

appropriate link in the Certification column.

Emissions ............................................... EN 55011 Class A at 10 m

FCC Part 15A above 1 GHz

Immunity ................................................ EN 61326:1997 + A2:2001, 

Table 1

CE, C-Tick, and FCC Part 15 (Class A) Compliant

For full EMC compliance, operate this device with shielded cabling. In addition, 

all covers and filler panels must be installed.

This product meets the essential requirements of applicable European 
Directives, as amended for CE marking, as follows:

Low-Voltage Directive (safety): ............ 73/23/EEC

Electromagnetic Compatibility
Directive (EMC) .................................... 89/336/EEC

Refer to the Declaration of Conformity (DoC) for this product for any additional 

regulatory compliance information. To obtain the DoC for this product, visit 

ni.com/hardref.nsf

, search by model number or product line, and click the 

appropriate link in the Certification column.