Southbend SB1025 用户手册

For Machines Mfg. Since 8/09

SB1024/SB1025/SB1026

-29-

Use Figures 15–16 and the following 
descriptions to understand the functions of the 
mill control panel.

 Allows power flow to the motor. The 

spindle direction switch must be used to start the 
spindle rotation.

 Illuminates when the mill is 

connected to a power source.

 Stops the flow of power 

to the motor. Twist clockwise until it pops out to 
reset it, then press the ON button to re-establish 
power flow to the motor.

 Stops power flow to the motor.

 Starts, stops, and 

reverses the direction of spindle rotation.

Note: The Model SB1025 has two positions for 
each direction that electronically change the 
speed of the motor and work in conjunction with 
the belt housing controls to set the spindle speed 
range (refer to "To set the spindle speed range 
for the Model SB1025" on Page 39 for additional 
details).

The mill table moves in three directions, as 
illustrated in Figure 17:

X-axis (longitudinal)

s

9 AXIS

s

: AXIS

These movements are controlled by table ball 
HANDLES

X-Axis or Longitudinal Travel

(Left & Right)

Y-Axis or
Cross Travel
(In & Out)

Z-Axis or Vertical Elevation

(Up & Down)