Toshiba e-Studio160 服务手册

December 2002 TOSHIBA TEC

4 - 13

e-STUDIO160/200/250 TROUBLESHOOTING

4.1.3 Transporting jam for the optional trays

E31

Paper not reach to feed sensor from tray 2

E32

Paper not reach to feed sensor from tray 3/4

E33

Paper not reach to feed sensor from LCF

When recording paper is left on the recording paper path, remove it. If this error occurs fre-

quently, the following items should be checked.

Is the feed sensor working? (using the test mode 04, Sensor Test, DATA No. 6 Bit 2)

1. Check if each connector between the feed sensor and the relay PWA (CN33) is

disconnected.

2. Check if each connector pin is removed or the harness is broken.

3 Check if any conductor pattern on the relay and main PWA is open- or short-

circuited.

4. Replace the feed sensor.

5. Replace the relay PWA.

6. Replace the main PWA.

Check to see if there are any foreign obstacles on the recording paper path.

YES