Toshiba e-Studio160 服务手册

e-STUDIO160/200/250 ADJUSTMENT ITEMS

1 - 18

December 2002 TOSHIBA TEC

1.2.3 User test mode

When you press the PROGRAM key and enter the TEST mode from the menu, the items that can be

tested by the user are displayed.

(1) AUTO TEST

This mode allows the user to independently diagnose the machine by automatically performing a

series of tests.

Test Items

a) Flash ROM test

Calculates and compares the check sums of the firmware, function data and

language information with the previously stored corresponding check sum

values.

b) SRAM test

Same as Function Test.

c) DRAM test

Same as Function Test.

d) MODEM test

Same as Function Test.

e) SCANNER test

Same as Function Test.

f) CODEC test

Same as Function Test.

g) Printer test

Checks each part of the printer (fan, HVPS, polygon, heater, LSU) and prints

one page of test pattern (not performed when there is no paper).

h) Phonebook data test Calculates and compares the check sum of the phonebook with the previ-

ously stored check sum value.

i) Network board test (with GF-1110)

PROGRAM

Select TEST MODE

Press the PROGRAM key

Auto test run

SET

Select AUTO TEST

End of TEST

Use or keys

It takes about 2 minutes to

finish TEST

AUTO TEST

-------------------

AUTO TEST

Completed

PROGRAM
01.DEFAURT SETTINGS
02.LISTS
03.INITIAL SETUP

TEST MODE
01.AUTO TEST
02.INDIVIDUAL TEST
03.TEST RESULT LIST