Husqvarna K3000 用户手册
English
– 7
SAFETY INSTRUCTIONS
General safety warnings
Save all warnings and instructions for future reference.
The term ”power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
operated (corded) power tool or battery-operated (cordless)
power tool.
Work area safety
•
Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
invite accidents.
•
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
•
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
power tool. Distractions can cause you to lose control.
•
Do not use the machine in bad weather, such as dense
fog, rain, strong wind, intense cold, etc. Working in bad
weather is tiring and can lead to dangerous conditions,
e.g. slippery surfaces.
fog, rain, strong wind, intense cold, etc. Working in bad
weather is tiring and can lead to dangerous conditions,
e.g. slippery surfaces.
•
Ensure when cutting that no material can become loose
and fall, causing operating injury.Take great care when
working on sloping ground.
and fall, causing operating injury.Take great care when
working on sloping ground.
Electrical safety
•
Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce the risk of electric shock.
plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce the risk of electric shock.
•
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is
earthed or grounded.
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is
earthed or grounded.
•
The power tool should not be exposed to more moisture
than what is supplied by the low flushing water system. Do
not expose the power tool to rain. Water entering a power
tool will increase the risk of electric shock.
than what is supplied by the low flushing water system. Do
not expose the power tool to rain. Water entering a power
tool will increase the risk of electric shock.
•
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from
heat, oli, charp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
pulling or unplugging the power tool. Keep cord away from
heat, oli, charp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
•
When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of cord suitable for
outdoor use reduces the risk of electric shock.
cord suitable for outdoor use. Use of cord suitable for
outdoor use reduces the risk of electric shock.
•
Check that the cord and extension cord are intact and in
good condition. Never use the machine if the cord is
damaged, hand it in to an authorized service workshop for
repair.
good condition. Never use the machine if the cord is
damaged, hand it in to an authorized service workshop for
repair.
•
Do not use an extension cord while it is rolled up to avoid
overheating.
overheating.
•
The machine should be connected to an earthed outlet
socket. Check that the mains voltage corresponds with
that stated on the rating plate on the machine.
socket. Check that the mains voltage corresponds with
that stated on the rating plate on the machine.
•
Ensure the cord is behind you when you start to use the
machine so that the cord will not be damaged.
machine so that the cord will not be damaged.
!
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electrtic
shock, fire and/or serious injury.
instructions. Failure to follow the warnings
and instructions may result in electrtic
shock, fire and/or serious injury.
!
WARNING! The safety distance for the power
cutter is 15 metres. You are responsible to
ensure that animals and onlookers are not
within the working area. Do not start cutting
until the working area is clear and you are
standing firmly.
cutter is 15 metres. You are responsible to
ensure that animals and onlookers are not
within the working area. Do not start cutting
until the working area is clear and you are
standing firmly.
!
WARNING! Do not wash the machine with
water, as water can enter the electrical
system or the engine and cause damage to
the machine or short circuit.
water, as water can enter the electrical
system or the engine and cause damage to
the machine or short circuit.