Frigidaire 4400 用户手册

7

Notes: 

 •  The dishwasher will not 

operate correctly if the 

wash arm is not aligned 

with one of the water inlet 

holes on back wall of the 

dishwasher.

•  The left and right side 

adjusters on the racks 

must both be fully in the upward or downward 

position for proper connection.

The adjustable upper rack can be raised or 

lowered to accommodate taller plates, platters, 

pans, etc. optimizing usable space in both upper 

and lower racks.  Full-size dinner plates can be 

loaded in the upper rack if it is in the lower position.  

Always adjust the upper rack before loading.
To lower the rack:

  1.  Pull the rack fully out.
  2.   Place thumbs on each lever on the adjuster 

while holding rack with both hands.

  3.    Press down on the levers with thumbs and 

push rack down. The rack will come to a stop 

when it is in position.  

To raise the rack:
  1.   Pull the rack fully out.
  2.    Place hands on both sides and lift up until 

rack comes to a stop and latches in place.

 

The rack can be removed when tall or oversized 

items need to be loaded into the lower rack. 

Unload the rack before removing it from the 

dishwasher.

To remove rack with tab-lock rack stops:
 1.  Roll the rack 1 ⁄ 3 to 1 ⁄ 2 of the way out.
 2.  Locate the rack stops at the end of each 

track. Squeeze the tab in the middle of the 

rack stop and pull the rack stop straight out. 

Take care to support the rack while removing 

the rack stops.

 3.  Roll the rack all the way out of the track and 

remove from the dishwasher.

To replace:
 1.  Replace the dishwasher rack by guiding the 

wheels into the tracks.

 2.  Push each rack stop squarely into the end of 

the track until the catch pops into the small 

hole on the side of the track.