Homesmart Appliance SRS LYNC-S 用户手册

CHAPTER 4
CONFIGURING YOUR ROOM SYSTEM’S SOFTWARE

smarttech.com/kb/170450

8. Orient the interactive flat panel by following the on-screen instructions.

NOTE

If you touch a target in either the calibration screen or the orientation screen but aren’t

advanced to the next target, press the spacebar or the Orient button

to move to the next

interactive flat panel and try again.

9. Click Next, and then click Finish.

10. If you’re configuring a room system with two interactive flat panels, repeat steps 2 to 9 for the

second interactive flat panel.

NOTE

You don’t need to calibrate or orient the console.

11. Continue to the next procedure.

To optimize the camera

1. If SMART Settings isn’t open from the previous procedure, click OEM Settings, and then click

SMART Settings.

SMART Settings appears.

2. Click SMART Hardware Settings.

3. Click the camera’s icon.

4. Click Preview.

The

Camera Configuration window opens.

5. Select the mains power line frequency for your country (50 Hz or 60 Hz), set the pan, tilt and

zoom as appropriate for the meeting room’s size, and then click OK.

NOTE

Digital pan and tilt options are available only when the camera is zoomed in.

6. Click OK.

SMART Settings closes.

7. Continue to the next procedure.