Rancilio ROCKY-SD 用户手册

下载
页码 48
29
2. DESCRIPTION
2.1 Features
The machine is composed of a single structure for 
coffee grinding and dosage.
The machine has a cast aluminium structure and 
plastic panelling.
The coffee beans are held in a hopper fitted with a lid. 
When the machine is turned on, the grinding device 
under the hopper is activated. The ground coffee is 
collected in the front container, from where the coffee 
doses may by taken by activating a hand lever.
2.2 Protections
All moving parts are inside the machine panelling.
In the bean container 1 (Fig.3) a protection is fixed 
with screws to protect your hands when filling and 
cleaning the bean container.
2.3 Aerial noise 
In working place  the noise level does not generally 
exceed 70dB(A).
2.4 Vibrations
The machine is supplied with rubber vibration sup-
pressing  feet.    In  normal  working  conditions,  the 
machine does not produce vibrations harmful to the 
operator and the environment.
2.5. Specifications and composition (Fig.3)
Legend:
 
1  Bean container
2  Main and coffee grinding switch
3  Grinding button (SD)
4  Grinding adjustment button
5  Filter support
6  Ground coffee exit chute (SD)
7  Ground coffee dose lever
8  Ground coffee container
3. TECHNICAL DATA (Fig.4)
Machine dimensions
A=116    B =245  
C=350mm.
Packing dimensions
A=230    B=340 
C=410mm
Packing volume 
0,03 m
3
Net weight
7 kg
Gross weight with 
packing
7,5 kg
No. of items
1
Grinder motor
1400W
Electricity supply
See label data Fig.1
Bean container capacity
300 gr.
Gound coffe container 
capacity
CA 200 gr.
Working place tempe-
rature
+5° +45° C
4. USE 
The machine has been designed to grind coffee.
Any  other  use  is  to  be  considered  unsuitable  and 
therefore dangerous.
The user must always follow the indications contai-
ned in this manual.  In the case of a failure or if the 
machine is not working properly, switch it off and do 
not attempt any direct repair.  
Contact the assistance service.
The user must not:
 put his hands under the ground coffee container;
 transport the machine or carry out maintenance 
operations with the plug connected and when the 
machine is warm;
  pull  the  supply  cable  in  order  to  disconnect  the 
machine from the supply network;
 use the machine if the supply cable is damaged;
  touch  the  machine  with  wet  or  damp  hands  or 
feet;
 wash the machine with water or vapour jet;
 dip the machine in water or other liquid;
  use  the  machine  when  there  are  children  in  its 
proximity;
 allow the machine to be used by children or inca-
pable person;
 obstruct the suction or heat despersal grilles with 
cloths, ect.;
 leave the side doors open;
 place container with liquid on the machine