Smeg SCB60MFX5 用户手册
Instruction for the installer
8
2.3 Connecting to natural and LPG gas
(Please see connection diagram)
Make the connection to the appliance using flexible bayonet style hose in
accordance to B.S. 669. The hose connection at the rear of the appliance has a
½” BSP internal thread. Please use seal C between the flexible connection L and
the appliance supply tube B. When making the connection, make sure that no
stress of any kind is applied to the cooker and that the hose does not touch any
sharp edges.
If connecting to LPG the bayonet hose must have red bands on it.
½” BSP internal thread. Please use seal C between the flexible connection L and
the appliance supply tube B. When making the connection, make sure that no
stress of any kind is applied to the cooker and that the hose does not touch any
sharp edges.
If connecting to LPG the bayonet hose must have red bands on it.
2.3.1
Connection to the gas bottle inside the compartment in the cooker (on some models
only)
only)
Open the side door and put in a gas bottle (max. 15
kg). Fit one end of the pipe to the pipe holder and fix
it to one of the clamps supplied. Insert the pipe into
the bottle compartment through the hole in the back
of the cooker as shown in the diagram here. Fit the
free end of the pipe to the pressure regulator on the
gas bottle: fix it with the second clamp. Check for
any leaks using a soapy solution, never with a
live flame.
kg). Fit one end of the pipe to the pipe holder and fix
it to one of the clamps supplied. Insert the pipe into
the bottle compartment through the hole in the back
of the cooker as shown in the diagram here. Fit the
free end of the pipe to the pressure regulator on the
gas bottle: fix it with the second clamp. Check for
any leaks using a soapy solution, never with a
live flame.
To connect the cooker to a gas bottle, use a piece of regulation rubber pipe 1.4 m (
±
0.05 m) long
2.3.2
Bottled gas connection (Only on some models)
Use a pressure regulator complaint with the relevant standards and make the connection to the gas cylinder in
accordance with the relevant regulations.
Make sure that the gas supply pressure is as stated in the table in point "3.2/3.3 Burner and Nozzle Data Tables".
Make sure that the gas supply pressure is as stated in the table in point "3.2/3.3 Burner and Nozzle Data Tables".
Screw the small hose connector F onto the large hose connector A and
connect the resulting unit to the gas union B (or use the hose connector
G for connection straight to the gas union B) and fit the seal C. Fit the
ends of the rubber hose H onto the hose connector A+F (or G) and to
the outlet union of the pressure reducer on the gas cylinder. Fix the end
of the hose H to the hose connector A+F (or G) using the regulation
hose clamp I .
G for connection straight to the gas union B) and fit the seal C. Fit the
ends of the rubber hose H onto the hose connector A+F (or G) and to
the outlet union of the pressure reducer on the gas cylinder. Fix the end
of the hose H to the hose connector A+F (or G) using the regulation
hose clamp I .
The hose connector G shown is not supplied with the appliance. Use only hose connectors
compliant with the relevant regulations.