Viking RDECU2665BSB 用户手册

Installation

Neutral

Green

Black

Red

Lower cooktop into cutout.

Connect the red and black leads from the unit conduit

to the corresponding leads in the junction box.

Cooktop

Bracket

Countertop

Screw

Filler
Block

Cooktop

Bracket

Eye Bolt

Countertop

Filler

Block

After placing cooktop in the cutout, screw brackets to

burner box with sheet metal screw. (Six bracket

assemblies included - 2 per side, 1 front, 1 rear)

Screw sheet metal screws into brackets

and tighten firmly against bottom of countertop.

Note: It is recommended to use a filler block between

the bolt and the underside of the countertop to

prevent any damage to the countertop. Failure to do

so may result in cracking or splitting of the countertop.

Final Preparation

• Some stainless steel parts may have a

plastic protective wrap which must be

peeled off.

• All stainless steel body parts should be

wiped with hot, soapy water and with a

liquid cleaner designed for this material.

If buildup occurs, DO NOT use steel wool,

abrasive cloths, cleaners, or powders!

Performance Checklist

A qualified installer should carry out the

following checks:

Check top surface elements
1. Check top surface elements – glow red

when turned on.

2. Check hot surface indicator lights – glow

red when corresponding element is hot.

If it is necessary to scrape stainless steel

to remove encrusted materials, soak with

hot, wet cloths to loosen the material,

then use a wood or nylon scraper.

DO NOT use a metal knife, spatula, or

any other metal tool to scrape stainless

steel! Scratches are almost impossible

to remove.

Any adjustments necessary that are a result of
the installer not following instructions will be
the responsibility of the installer, dealer of the
end user of this product.