Roland Vs-880 用户手册
4.
Make settings for the MIDI messages that will produce
the metronome sound. Press [SYSTEM], select “SYS
MIDI PRM?”, and set the following parameters.
the metronome sound. Press [SYSTEM], select “SYS
MIDI PRM?”, and set the following parameters.
MetroCh:
Select the MIDI channel on which the
metronome note messages will be
transmitted. Set this to match the
MIDI receive channel of your MIDI
sound source.
metronome note messages will be
transmitted. Set this to match the
MIDI receive channel of your MIDI
sound source.
Acc.Note:
Select the note number (C_0ÐG_9) for
the downbeat of the metronome. If
you are playing a drum set, this will
select the percussion instrument.
the downbeat of the metronome. If
you are playing a drum set, this will
select the percussion instrument.
Acc.Velo:
Specify the velocity (1Ð127) of the
metronome downbeat.
metronome downbeat.
Nrm.Note:
Select the note number (C_0ÐG_9) for
the upbeats of the metronome. If you
are playing a drum set, this will select
the percussion instrument.
the upbeats of the metronome. If you
are playing a drum set, this will select
the percussion instrument.
Nrm.Velo:
Specify the velocity (1Ð127) of the
upbeats of the metronome.
upbeats of the metronome.
5.
This completes metronome settings. Press [PLAY (DIS-
PLAY)] to return to Play condition.
PLAY)] to return to Play condition.
Using a foot switch to play-
back/stop
A foot switch connected to the FOOT SWITCH jack can be
used instead of the [PLAY] button. This is convenient when
both hands are occupied, such as when playing the guitar
on stage.
used instead of the [PLAY] button. This is convenient when
both hands are occupied, such as when playing the guitar
on stage.
1.
Press [SYSTEM] several times until the display indi-
cates “SYS System PRM ?”.
cates “SYS System PRM ?”.
2.
Press [YES].
3.
Press PARAMETER [
] several times until “SYS
Foot Sw=” appears.
4.
Rotate the TIME/VALUE dial. For this example, select
“Play/Stop”.
“Play/Stop”.
FootSw (Foot switch assign)
This sets the function of the foot switch connected to the
FOOT SWITCH jack.
FOOT SWITCH jack.
Play/Stop:
The song will alternately playback and stop
each time the foot switch is pressed.
each time the foot switch is pressed.
Record:
The foot switch will have the same function
as the [REC]. Use this to switch between
recording and playback during manual
punch-in recording.
as the [REC]. Use this to switch between
recording and playback during manual
punch-in recording.
TapMarker:
The foot switch will have the same function
as the [TAP]. A Mark point will be placed at
the time location where you press the foot
switch.
as the [TAP]. A Mark point will be placed at
the time location where you press the foot
switch.
Next:
The foot switch will have the same function
as the [NEXT]. Each time you press the foot
switch, you will move to the next Mark
point.
as the [NEXT]. Each time you press the foot
switch, you will move to the next Mark
point.
Previous:
The foot switch will have the same function
as the [PREVIOUS]. Each time you press the
foot switch, you will move to the previous
Mark point.
as the [PREVIOUS]. Each time you press the
foot switch, you will move to the previous
Mark point.
GPI:
A GPI trigger signal received from the
FOOT SWITCH jack will control song play-
back/stop.
FOOT SWITCH jack will control song play-
back/stop.
5.
Press [PLAY(DISPLAY)].
You will return to Play condition.
Stopping automatically
(Marker stop)
You can cause song playback to stop automatically at a
mark point.
mark point.
1.
Press [SYSTEM] several times until “SYS System PRM
?” appears.
?” appears.
2.
Press [YES].
3.
Press PARAMETER [
] several times until “SYS
Marker Stop=” appears.
4.
Rotate the TIME/VALUE dial. For this example, select
“On”.
“On”.
Marker Stop
Turn this ÒOnÓ when you want song playback to automati-
cally halt at time locations where a Mark point exists.
cally halt at time locations where a Mark point exists.
5.
Press [PLAY(DISPLAY)].
You will return to Play condition.
< About GPI >
ÒGPIÓ stands for ÒGeneral Purpose Interface.Ó This is a
control jack provided on professional and consumer video
devices such as video editors and title superimposers. By
connecting this control jack to the foot switch jack of the
VS-880 and setting the Foot Switch Assign to ÒGPI,Ó the
connected device will be able to playback/stop the VS-
880.
control jack provided on professional and consumer video
devices such as video editors and title superimposers. By
connecting this control jack to the foot switch jack of the
VS-880 and setting the Foot Switch Assign to ÒGPI,Ó the
connected device will be able to playback/stop the VS-
880.
Chapter 9 Other convenient functions
110