Husqvarna EZ5224 / 965880601 用户手册

下载
页码 80
MAINTENANCE
38
-Husqvarna
Engine Cooling Air Intake
Check that the engine’s cooling air intake is free from 
leaves, grass, and dirt. 
If the cooling air intake is clogged, engine cooling 
deteriorates, which can lead to engine damage.
The cooling air intakes rotates when the engine is 
running. Keep fingers away.
Throttle Cable
Check that the engine responds to throttle increases 
and that a good engine speed is attained at full 
throttle.
If doubts arise, contact the service workshop.
If adjustments are necessary, they can be made as 
follows for the lower cable:
loosen the clamping screw for the cable’s 
1. 
outer casing and move the throttle to the full 
throttle position.
Check that the throttle cable is mounted 
2. 
in the correct hole in the lower lever, see 
illustration.
Push the throttle cable’s outer casting as 
3. 
far to the right as possible and tighten the 
clamping screw.
8061-014
Check and clean the cooling air intake
8011-605
Adjusting the throttle cable
8011-605
Adjusting the choke cable
Choke Cable
If the engine produces black smoke or is difficuIt 
to start, this can be because the choke cable is 
incorrectly adjusted (upper cable).
If doubts arise, contact the service workshop.
If adjustments are necessary, they can be made as 
follows:
loosen the clamping screw for the cable’s 
1. 
outer casing and push the choke control fully 
in.
Check that the choke cable is mounted in the 
2. 
upper lever, see illustration. Push the choke 
cable’s outer casing as far to the left as 
possible and tighten the clamping screw.