Patton electronic 2120 用户手册

47

5.

If prompted for Password, type: 

” and press 

.

6.

At the FTP prompt, type: 

 and press 

.

7.

If completed, type: 

 and press 

 to return to the TS 

prompt 

8.

At the TS prompt, type: 

 and press 

.

9.

Once the image is activated, you will lose your connection to the 
Model 2120.

To verify new software version, TELNET back into the 2120 by typing 

 and press 

. The 

new software version should be listed at the top of the screen.

The following conditions must be met before loading new operational 
software on your 2120:

• You must have a valid IP address assigned to the Model 2120 and the 

2120 must be connected to the LAN with Internet access

• You must have an FTP Client (i.e. Windows Command Mode) on a 

computer that can communicate over the LAN

• You must obtain a Patton Username and Password and obtain the IP 

address of Patton’s FTP Server and current 2120 software version file-
name from 

upgrades.patton.com.

To load new software into the 2120, execute the following steps:

1.

From the Windows “Run” prompt at your computer, type: 

 

and click 

.

2.

At the DOS prompt, Telnet into the 2120 by typing: 

 and pressing 

.

3.

At the Terminal Server prompt (TS>), FTP into Patton’s FTP Server 
by typing: 

 and 

pressing 

.

4.

Enter FTP Username by typing: 

 and pressing 

.