IMC Networks iMcV-FiberLinX, TX/FX-SM1310/LONG-SC 56-14518 用户手册
产品代码
56-14518
www.imcnetworks.com
800-624-1070
www.mediaconverter.com
iMcV-FiberLinX
SNMP Management Made Easy
FiberLinX features an SNMP management agent for monitoring the status and activity on copper and fiber ports at the
remote end. Perform initial setup of the unit and modifications in the field via: iView² SNMP application, Telnet/TFTP, or
local serial connection.
remote end. Perform initial setup of the unit and modifications in the field via: iView² SNMP application, Telnet/TFTP, or
local serial connection.
Enable features and change configuration settings from
central office.
Remote upgrades via Telnet/TFTP, serial port or iView².
Monitor both units and the fiber in between.
Receive real-time monitoring and statistics.
Change bandwidth “on-the-fly” up to 100 Mbps in 32 kb
increments.
Create a secure management domain to isolate
management domain broadcasts from TX Data ports on
both units.
User-definable unit/port descriptions and information.
central office.
Remote upgrades via Telnet/TFTP, serial port or iView².
Monitor both units and the fiber in between.
Receive real-time monitoring and statistics.
Change bandwidth “on-the-fly” up to 100 Mbps in 32 kb
increments.
Create a secure management domain to isolate
management domain broadcasts from TX Data ports on
both units.
User-definable unit/port descriptions and information.
•
•
•
•
•
•
•
•
•
•
Offering unparalleled flexibility, FiberLinX supports multiple fiber types including multi-mode and single-mode as well as
single-strand fiber which can effectively double the capacity of installed fiber.
single-strand fiber which can effectively double the capacity of installed fiber.
The iMcV-FiberLinX features:
• One 100 Mbps fiber data port
• One 10/100 twisted pair data port
• One additional 10/100 twisted pair port (TX EXT) for management (Also functions as serial port)
• One 10/100 twisted pair data port
• One additional 10/100 twisted pair port (TX EXT) for management (Also functions as serial port)
Twisted pair ports can auto-negotiate or have the speed and duplex set. Ports also feature Flow Control in FDX and Back
Pressure Flow Control.
Pressure Flow Control.
Two models are also available with SFP ports, allowing accommodation for changing fiber requirements; simply install a
new SFP module rather than replacing an entire FiberLinX unit.
new SFP module rather than replacing an entire FiberLinX unit.
Flexibility
Technical Specifications
Networking
General
Preserves complete end-to-end fiber
connection integrity
Broadcast Storm Protection
Bi-directional bandwidth control
Read/write IEEE 802.1Q VLAN-tags
QoS: IEEE 802.1p-based packet
prioritization (2 queues [high/low] with
8 levels of priority)
8 levels of priority)
Layer 2 packet switching, store and
forward operation
Forwarding rate: 14,880pps for 10 Mbps;
148,800pps for 100 Mbps;
AutoCross for MDI-II/MDI-X
Features Auto-Negotiation and Selective
Advertising
Supports Half and Full-Duplex operation
MTU: Supports over-sized (Jumbo)
packets up to 1916 bytes per packet
•
•
•
•
•
•
•
•
•
•
•
Management
SNMP V1 and V2c compatible
Includes GUI-based iView² software for
remote management and upgrades
Monitors far-end (remote) status without a
physical presence or separate connection
IEEE 802.3x Flow Control
Includes DHCP and TFTP clients
Supports Telnet
Includes loopback test modes (MAC swap)
Includes LinkLoss and FiberAlert
Supports the Unified Management Agent
(UMA)
Includes status LEDs
Security
Password Control
Multiple Access Levels: User Assigned
Accounts & Access Levels
•
•
•
•
•
•
•
•
•
•
•
•
Ethernet Types Supported
IEEE 802.3i 10Base-T twisted pair
IEEE 802.3u 100Base-TX twisted pair
IEEE 802.3u 100Base-FX or SX fiber
•
•
•