Husqvarna RZ19 CE / 966658901 用户手册
ContRoLs
17
This operator’s manual describes the Husqvarna Zero
Turn Rider. The rider is fitted with a Briggs & Stratton
19 HP* four-stroke overhead valve engine.
Turn Rider. The rider is fitted with a Briggs & Stratton
19 HP* four-stroke overhead valve engine.
Transmission from the engine is made via belt-driven
hydraulic pumps. Using the left and right steering
controls, the flow is regulated and thereby the
direction and speed.
hydraulic pumps. Using the left and right steering
controls, the flow is regulated and thereby the
direction and speed.
Cutting height handle
1.
Park brake
2.
Throttle / choke control
3.
Ignition switch
4.
Motion control levers
5.
Blade control lever
6.
Fuel tank cap
7.
Fuel shut off valve
8.
Bypass linkage
9.
Control Locations
1
2
3
4
5
6
8
9
7
8058-070-1
*The power rating of the engines indicated is the average
net power output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard
J1349/ISO1585. Mass production engines may differ from
this value. Actual power output for the engine installed
in the final machine will depend on the operating speed,
environmental conditions and other variables.
net power output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard
J1349/ISO1585. Mass production engines may differ from
this value. Actual power output for the engine installed
in the final machine will depend on the operating speed,
environmental conditions and other variables.