Garland MCO-GS-10E 用户手册
20
1
2
3
4
7
5
7
8
6
NOTICE: DEPENDENT DOOR SHOWN
7
To disassemble left door:
1. Once the door has been removed from the oven (refer to instructions on the previous page),
1. Once the door has been removed from the oven (refer to instructions on the previous page),
remove the 12 truss head 10 x ½ Phillips screws
.
2. Remove 2 allen head cap screws from the door handle
.
3. Carefully pry off the door panel
from the door window bezel
.
4. Remove 2 hex head m.s. ¼ -20 x ½ from the door liner
that attach hold down straps
to
the door liner
.
5. Lift out the door frame
.
6. Carefully pry off the door window
for door liner
.
7. To remove door catch
remove 2 pan head Phillips screws.
8. To reassemble - reverse above procedure.
NOTE: There is a seam one side of the bezel that is part of the door window
NOTE: There is a seam one side of the bezel that is part of the door window
, reinstall
working from the opposite side that the seam is on and work around the window
towards that seam.
towards that seam.
Disassembly of the Right Door (w/o window)