Crane Merchandising Systems 677 用户手册
Set up a Hot Drink
HDC II Programming Guide
6730018
39
July, 2003
SET UP LOW POWER SETTINGS
Low power settings allow for the water tank to be set to a lower temperature at up
to 4 different dates and times.
to 4 different dates and times.
For example, you want to lower the tank temperature to 160º F overnight on
Mondays through Fridays. The machine tank temperature setpoint will be
changed to 160º F at 6:00 pm and maintained at that temperature until 5:00 am on
the following morning when the setpoint is returned to 202º F. Please keep in
mind that at 5:00, the machine will just begin to increase to the 202º F setpoint
temperature. It is up to you to determine how long that will take and to allow
enough time for the tank to be at its proper temperature when the machine will be
used. Typically, one hour is adequate to return to the normal operating tempera-
ture. NOTE: The machine
Mondays through Fridays. The machine tank temperature setpoint will be
changed to 160º F at 6:00 pm and maintained at that temperature until 5:00 am on
the following morning when the setpoint is returned to 202º F. Please keep in
mind that at 5:00, the machine will just begin to increase to the 202º F setpoint
temperature. It is up to you to determine how long that will take and to allow
enough time for the tank to be at its proper temperature when the machine will be
used. Typically, one hour is adequate to return to the normal operating tempera-
ture. NOTE: The machine
OUT OF SERVICE condition during the low power
interval will be determined by how you have set the
LTDIS configuration.
1.
Press
then press
until the screen displays
LOW.PWR.- - - - .
Press the number of the time interval you want to edit, or
to edit
time interval 1 (we will use interval 1 for this example).
2.
The display shows
LOW.PW ON or LOW.PW OFF. This display tells you
whether your time interval (represented by 1) is on or off. Press
to
change the condition of the time interval.
3.
If you turn an interval ON, it must be edited. You can edit a time interval
now, then turn it OFF until another time.
now, then turn it OFF until another time.
4.
Press
. The display shows
1.STRT X.XX.==X.XX is the currently set
start time. Enter a new start time (24-hour format) for this interval. To
enter the time for 6:00 pm, enter 1800.
enter the time for 6:00 pm, enter 1800.
5.
Press
. The display shows
1.STOP X.XX.=====X.XX is the currently set
stop time. Enter a new stop time (24-hour format) for this interval. To enter
the time for 5:00 am, enter 0500.
the time for 5:00 am, enter 0500.
6.
Press
. The display shows
1.@ - - - - - - - . The dashes represent the
days that this time interval is active. Pressing number keys 1 through 7
switches the days on/off. 1=sunday, 2=monday, etc. For example, press "2",
“3”, "4", “5”, and "6". The display now shows
switches the days on/off. 1=sunday, 2=monday, etc. For example, press "2",
“3”, "4", “5”, and "6". The display now shows
1.@ - M T W T F -. This interval is active on Monday through Friday.