Whirlpool DU945 用户手册

5. Push door firmly closed. The door latches automatically. Run 

hot water at the sink where you will connect dishwasher until 
water is hot. (See “Dishwasher Efficiency Tips.”) Turn off the 
water and hook the dishwasher to the faucet. (See 
“Connecting the Dishwasher.”) Turn on the hot water.

6. Press the desired cycle and option selections. (See 

“Dishwasher Use.”)

7. Press START/RESUME.

You can stop your dishwasher anytime during a cycle.

1. Open the door slightly. 

2. Wait for the spraying action to stop. Then open the door all 

the way, if needed. 

Close the door to continue the cycle.

Press CANCEL/DRAIN. A 2-minute drain starts. 

NOTE: A special adapter must be installed on the faucet before 
the dishwasher can be connected. Complete Installation 
Instructions and the adapter are packed with your dishwasher. 
(See the Installation Instructions.) 

When moving your dishwasher, make sure the door is latched. 
Hold the dishwasher at the top front corners.

1. Remove the screen holder or aerator, screen, and washer 

from the end of the faucet.

2. Use the faucet adapter kit that came with your portable 

dishwasher to modify the faucet where the dishwasher will be 
used.

NOTE: Remove and save the washer, screen, and screen holder 
or aerator for future use.

Insert the two screens and then the thin washer from the faucet 
adapter kit into the faucet adapter. Attach the adapter onto the 
end of the faucet.

NOTE: Do not use the thick washer.

Insert the 2 screens, the thin washer, and then the thick washer 
from the faucet adapter kit into the faucet adapter. Attach the 
adapter onto the end of the faucet. 

NOTE: Use both washers.