Whirlpool DUL200 用户手册

下载
页码 40
12
     A small amount of water runs through the pump to        
remove soil particles.
Canceling a Cycle
Anytime during a cycle, press
Cancel/Drain glows. The dishwasher pauses for about 5 seconds 
and starts a 2-minute drain (if needed). Let the dishwasher drain 
completely. The light goes off when the dishwasher finishes the 
drain.
To stop the drain
You can press Cancel/Drain again to stop the drain immediately. 
Remember to drain the dishwasher before starting a new cycle.
NOTE:
 A small amount of water remains in the dishwasher. This 
is normal.
To clear the indicators
Press Cancel/Drain before starting the dishwasher to clear all 
options and cycles.
Changing a Cycle or Setting
During the first minute of a cycle
Press a new cycle and/or options.
After the first minute of a cycle
1.
Press
Cancel/Drain glows. The dishwasher pauses for 5 seconds 
and starts a 2-minute drain (if needed). Let the dishwasher 
drain completely.
2.
Check the detergent dispensers. If the main wash cup has 
opened and the detergent washed away, refill the cups as 
needed.
3.
Close the door.
4.
Press a new cycle and/or options. 
Adding Items During a Cycle
You can add an item anytime before the main wash starts. Open 
the door and check the detergent dispenser. If the main wash 
section is still closed, you can add items.
To add items
1.
Lift up the door latch to stop the cycle. Wait for the spraying 
action to stop before opening the door.
2.
Open the door. If the main wash detergent dispenser is still 
closed, add the item.
3.
Close the door, but do not latch it. Wait 30 seconds for the air 
in the dishwasher to warm up. This reduces the amount of 
moisture escaping from the vent when restarting a cycle.
4.
Close the door firmly until it latches. The dishwasher resumes 
the cycle after about a 5-second pause.
Option Selections
You can customize your cycles by pressing an option. If you 
change your mind, press the option again to turn the option off. 
Select a different option if desired. 
You can change an option anytime before the selected option 
begins. For example, you can press an unheated drying option 
any time before drying begins.
After a wash cycle, the dishwasher remembers the options used 
and uses the same options in the next wash cycle, unless you 
select new options or press Cancel/Drain.
Hi-Temp Scour 
Select this high-temperature option for improved cleaning of 
heavily soiled dishes. Selecting this option adds heat, water and 
time to the wash cycle. Heating the water helps improve washing 
results.
The Pots & Pans cycle, with the Hi-Temp Scour feature, is 
recommended for baked-on soil.
NOTE: 
The Hi-Temp Scour feature is an option with Pots & Pans 
and Heavy Wash.
    
Pre-
Wash
Rinse
Main 
Wash
Rinse
Purge
Final  
Rinse
Dry
Time
(min)
Water 
Usage
(gal/L)
140°F 
(60°C)
26*
Light
Soil
4.8-6.9/
18.2-26.1
    
Pre-
Wash
Rinse
Main 
Wash
Rinse
Purge
Final  
Rinse
Dry
Time
(min)
Water 
Usage
(gal/L)
10
Light
Soil
2.2-4.3/
8.2-16.4
Use this cycle for pre-
rinsed or lightly soiled 
loads which do not 
require drying. No drying 
options are available for 
this cycle. The cycle uses 
a single wash.
Use 
covered 
detergent 
dispenser 
section.
 
Use this cycle for rinsing 
dishes, glasses, and 
silverware that will not be 
washed right away.
Do not use 
detergent 
with this 
cycle.