Whirlpool SERIES 920 用户手册

20

The Washing  indicator glows at the start of

the first fill of any cycle
(except Rinse Only) and
remains on until the end
of the main wash.

The Water Heating indicator glows when-

ever water is heated
during a cycle.

The Rinsing indicator glows during the last

two rinses of all cycles.

The Drying indicator glows during the 

drying portion of each
cycle – even if you
select Air Dry. It turns
off at the end of the

cycle. If dishes are not as dry as you 
expected when using Air Dry, either allow
longer drying times (overnight) or do not
use Air Dry.

The Clean indicator glows at the end of a 

cycle to show that the 
load is clean. All other 

indicators turn off. The 
Clean indicator glows until

you open the door or press Cancel/Drain or
any other control pad.

The Controls Locked feature lets you lock

the control pads. When
the controls are locked,
you cannot start the
dishwasher.

To lock controls:
• Press and hold Air Dry (about 5 

seconds) until the Controls Locked
indicator glows.

To unlock controls:
• Press and hold Air Dry (about 5 seconds) 

until the Controls Locked indicator turns 
off.

8051221 v13 EN (c32)  6/24/98 2:25 PM  Page 20