Smeg DD409S 用户手册
20
PROGRAMMING
In this model of dishwasher, all programming procedures can only be
carried out with the door closed. As long as the door is open, the
In this model of dishwasher, all programming procedures can only be
carried out with the door closed. As long as the door is open, the
PROGRAMS lights (
4) and PHASES/PROGRAM lights (7) will remain
off.
SELECTION PROGRAM
The program selection is possible
through the relative buttons (2).
through the relative buttons (2).
When the button relating to the program required is pressed, the relative
light will come on to confirm the operation.
light will come on to confirm the operation.
START PROGRAM
To start the dishwasher, press the button of the PROGRAM (2) required
for a few seconds, until the light of the first phase of the selected
program starts to flash (confirmation beep).
To start the dishwasher, press the button of the PROGRAM (2) required
for a few seconds, until the light of the first phase of the selected
program starts to flash (confirmation beep).
As the program runs, the PHASES/PROGRAM lights (7) will indicate the
current cycle status.
current cycle status.
The light of the phase in progress will
flash, while the lights of the previous and
subsequent phases remain on.
flash, while the lights of the previous and
subsequent phases remain on.
N.B. during execution of programs which
do not include a prewash, the first
do not include a prewash, the first
PHASES/PROGRAM light (7) will remain
off.
off.
Prewash
Wash
Rinse
Dry
Eco
65°C
P1
P2
P3
P4
P5
User instructions