321 Studios FLR085D36E 用户手册

Manual     2100-422
Page      31

Disconnect fuel line, power cord and wires from T, T
on primary control.  Loosen (3) 1/4 inch bolts securing
burner mounting flange.  Twist burner counterclockwise
and pull straight back away from the furnace.  (See
Figure 19.)

Disconnect fuel line, power cord and wires from T, T
on primary control.  Remove (6) 5/16 inch bolts from
around front plate.  Next remove (2) 5/16 inch nuts
from upper right and left hand corners of the front plate.
Pull entire assembly straight back away from furnace.
BE CAREFUL NOT TO TIP ASSEMBLY UP OR
DOWN AS IT MAY DAMAGE THE COMBUSTION
CHAMBER.   (See Figure 20.)

STEP 1:

DISCONNECT "T-T" WIRES,

POWER CONNECTIONS, AIR

BOOT (OPTIONAL) AND OIL

LINES TO BURNER.

STEP 3:

REMOVE (2) NUTS

IN THE TOP LEFT

AND RIGHT CORNERS

OF BURNER PLATE.

STEP 2:

REMOVE (6) BOLTS

AROUND PERIMETER

OF BURNER PLATE

STEP 4:

PULL BURNER ASSEMBLY

STRAIGHT OUT TO PREVENT 

DAMAGE TO CHAMBER 

DURING REMOVAL.

MIS-1837

BURNER

PLATE

CHAMBER

*ELECTRICAL SHOCK HAZARD

*DISCONNECT POWER BEFORE

 SERVICING.

DANGER

!